Fabrication and creep properties of eutectic-composition Al2O3/YAG/YSZ sintered composites
No Thumbnail Available
Date
2021
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier Ltd
Abstract
"Three-phase alumina/YAG/yttria-stabilized cubic zirconia (YSZ) composites were fabricated by a solid-state reaction route starting from commercial powders of Al2O3, Y2O3 and monoclinic ZrO2. The final phases Al2O3,
YAG and YSZ were obtained after calcination of the powder mixtures at 1400 °C. Dense bulk composites were obtained after sintering, with a homogeneous microstructure of fine and equiaxed grains with sizes of 1
μm. Compressive mechanical tests were performed at 1300–1450 °C in air at constant load and at constant initial strain rate. A brittle-to-ductile transition was found with increasing temperature. Grain boundary sliding is the main deformation mechanism in the ductile regime, characterized by a stress exponent of 2 and by the absence of dislocation activity and changes in grain morphology. Alumina seems to be the rate-controlling phase owing to the improvement in creep resistance by the presence of yttrium and zirconium of the other two phases."